MyPi Integrator Board Connector/Link Location & Dimensions
See below PDF files showing board layout and dimensions
The PCB has 2 sets of break off tabs at the rear of the PCB to allow the unit to fit into two Hammond enclosures below (with and without bezels):
Single Height - Hammond 1455P1602(/BK)
Double Height - Hammond 1455Q1602(/BK)
The longest tabs are applicable when the plastic end plate bezel is used, the shorter two are for use when flanged end plates are fitted (which do not use the plastic bezels)
Core PCB Size : 125 x 142mm
+ Break Off Enclosure Tabs : 125 x 160/163.4mm
Mounting holes : 4 x M3.5