MyPi Integrator Board Power Consumption Data
The table below shows the power drawn in various modes using a Compute Module 1, these values were all steady state readings taken with a 12V DC input, the CPU was not over or underclocked
|
Modem |
SD Card |
Ethernet | mA |
| On | On | Plugged In | 240* |
| On | On | Unplugged | 210 |
| On | On | Off | 180 |
| Off | On | Plugged In | 210 |
| Off | On | Unplugged | 190 |
| Off | On | Off | 160 |
| Off | Off | Plugged In | 180 |
| Off | Off | Unplugged | 160 |
| Off | Off | Off | 130** |
* 350mA peek during cell registration/dialout (3G mode)
** 167mA for CM3
Extra power saving can be obtained by using the command below to switch off the HDMI output
# tvservice -o